StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Chemical Process Control an Introduction to Theory and Practice - Essay Example

Cite this document
Summary
The paper 'Chemical Process Control An Introduction to Theory and Practice' focuses on a process controller plant which is an arrangement of processing units, integrated with one another in a systematic and rational manner and follows a certain logic…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER95.5% of users find it useful

Extract of sample "Chemical Process Control an Introduction to Theory and Practice"

Methods of Controller Tuning A process controller plant is an arrangement of processing units (reactors, heat exchangers, pumps, distillation columns, absorbers, evaporation tanks, etc.), integrated with one another in a systematic and rational manner and follows certain logic. “The plant’s overall objective is to convert certain raw materials into desired products using available sources of energy, in the most economical manner” (Stephanopoulos 2). There are several requirements imposed on a plant by designers and the general social, technical and environmental conditions in the presence of ever-changing external influences. The most important of these requirements is safety. This is primary, in order to ensure the well being of the people in the plant and for its continued contribution to the economic development. The operating temperatures, pressures, concentrations, etc. should always be within allowable limits. Quality is also an important factor. A plant should be producing the desired amounts and quality of the final product. Moreover, the various types of equipments have constraints inherent to their operation. Such constraints should be satisfied throughout the operation of the plant. The plant must also conform to the market conditions that are the availability of raw materials and the demand of the final products. It should be as economical as possible in its utilisation of raw materials, energy, capital, and human labour, hence, operating at minimum cost and maximum profit, striking a right balance between both to give an optimal performance. Also, various federal and state laws may specify constraints on temperature, flow rates of effluents, etc. to be within certain limits, keeping environmental regulations in mind. (Stephanopoulos 3) All these requirements dictate the need for a good design, which is accomplished through proper selection of controllers, plant design parameters, etc. Different controllers have different effects on the response of the controlled process. The type of feedback controller to control the given process hence forms the first step of controller design. The second design question is “How do we select the best values for the adjustable parameters of the feedback controller chosen?” This is known as the Controller Tuning Problem. Various performance characteristics such as Overshoot, Rise time, Settling time, Decay ratio and frequency of oscillation of the transient could be used as the basic criteria, while designing. The designer must strike a subjective balance between the different conflicting characteristics through controller tuning. The various factors to be kept in mind while designing include minimisation of integral square error, fast control, minimum wear and tear of control equipment, no overshoot at start up and minimising the effect of known disturbances. (Altmann 112) There are various approaches to deal with the controller tuning problem: 1. Process Reaction Curve Method: This method was developed by Cohen and Coon. In this method, a unit step change of magnitude A is applied to the final control element actuator of a control system, which has been opened by disconnecting the controller from the final control element. The value of the output is recorded with respect to time. The curve obtained is known as Process Reaction Curve. Cohen and Coon observed that the response of most processing units to an input change had a sigmoidal shape, which can be adequately approximated by a first order system with dead time. Using this approximated first order model, the expressions for the “best” controller settings using load changes and various performance criteria were derived, such as One Quarter Decay Ratio, Minimum Offset, minimum integral square error. (Stephanopoulos 310) 2. One Quarter Decay Ratio Criterion: One of the simplified approaches towards controller tuning, it uses decay ratio as its performance criterion. It has been seen that a decay ratio, given by the ratio of the amounts of ultimate values of two successive peaks, C = 1 A 4 (Stephanopoulos 301) is a reasonable trade off between a fast rise time and a reasonable settling time. This criterion is known as One-Quarter Decay Ratio criterion. Usually, we select first the proportional gain Kc so that the controller has the necessary strength to push the response to the desired set point, and then we choose the corresponding value of time constant so that the above criterion is satisfied. 3. Zieglar Nichols Tuning Technique or Continuous Cycling Method: The term "continuous cycling" refers to a sustained oscillation with constant amplitude. Unlike the Process Reaction Curve Method, the ZN tuning technique uses data from closed loop response of the system. The system is first brought to the desired operational level. Then, using proportional control only, and with a feedback loop closed, a set point change is introduced. The proportional gain is adjusted till continuous cycling is obtained. This frequency of continuous cycling is called crossover frequency, wco. Let M the amplitude ratio of the system’s response at this crossover frequency. Then Ultimate gain= Ku= 1 M Ultimate period of sustained cycling = Pu= 2π wco Using the values of Ku and Pu, Zieglar and Nichols recommended certain settings, using which Kc and the time constants for various controllers can be determined. (Stephanopoulos 352) 4. Tuning for no overshooting on start – up (Pessen’s Method): This method is a variation of the continuous cycling method and it is used whenever no overshoot is permitted, even in the extreme case of start-up of the process. With start-up, we mean the transition from manual to automatic control. An extreme start-up situation exists, if the set point and PV are very different when changing from manual to automatic control. In contrast to a change of set point, the change from manual to automatic control does not cause a step change in ERR. Therefore, the change does not directly affect P or D-control. Example for applying this tuning procedure, according to Pessen, is a closed tank that could burst or an open tank that could overflow. The steps of closed loop tuning for no overshoot are the same as the ones for continuous cycling method. The formulae developed for PID control are as follows: Kc = 0.2 x Ku Tint = Pu 3 Tder = Pu 2 (Altmann 126) 5. Tuning for some overshooting on start – up: This method is a variation of the continuous cycling method. It is used whenever no overshoot during normal modulating control is desired, but some overshoot at start-up is acceptable. The steps of closed loop tuning for some overshoot are the same as the ones for continuous cycling method. The formulae developed for PID control are as follows: Kc = 0.33 x Ku Tint = Pu 2 Tder = Pu 3 (Altmann 127) In conclusion, it can be seen that controller tuning forms an extremely important part of the design problem and is given utmost importance in process control instrumentation. Basic methods like Process Reaction Curve Methods have been modified and have given way to more accurate methods of tuning such as Ziegler Nichols criteria. With the advent of digital control systems, it has been seen that Cohen Coon settings, Ziegler Nichols Settings and the time integral performance criterion methods are as relevant with these modern control systems, as they were with the basic control systems techniques, only much more advanced and even more accurate. Works Cited 1. Stephanopoulos, George. Chemical Process Control An Introduction to Theory and Practice, 5th Indian Reprint. United States: Prentice-Hall Inc., 1984. 2. Altmann, Wolfgang, Macdonald, David, et al. Practical Process Control for Engineers and Technicians. England: Elsevier, 2005. Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(Chemical Process Control an Introduction to Theory and Practice Essay, n.d.)
Chemical Process Control an Introduction to Theory and Practice Essay. Retrieved from https://studentshare.org/chemistry/1548846-process-controller
(Chemical Process Control an Introduction to Theory and Practice Essay)
Chemical Process Control an Introduction to Theory and Practice Essay. https://studentshare.org/chemistry/1548846-process-controller.
“Chemical Process Control an Introduction to Theory and Practice Essay”, n.d. https://studentshare.org/chemistry/1548846-process-controller.
  • Cited: 0 times

CHECK THESE SAMPLES OF Chemical Process Control an Introduction to Theory and Practice

International Business Mode of SABIC

The author assesses international trade theories, free trade, the theory of absolute advantage, the theory of absolute advantage and modes of International Business.... This international business is influenced by the process of globalization.... SABIC is a chemical producer who specializes in manufacturing a variety of chemicals, polymers, and fertilizers among others.... The globalization strategy of SABIC comprises exploiting the leading position of the organization as well as to manufacture the chemical products at low prices....
7 Pages (1750 words) Case Study

SABICs International Joint Venture Project with a Chinese Enterprise

However, the strong control of the Chinese government may serve as a hindrance in terms of maximizing the potential Pushing the implementation of SABIC's international joint venture plan in China opens a lot of business opportunities by enabling SABIC penetrate the market of China within the shortest possible time.... Despite the business opportunities behind the international joint venture project, the strong government control in China on top of the market saturation and the differences in the way Chinese people do business could lead to a long-term business failure....
16 Pages (4000 words) Essay

Waste water treatment

In the chemical and level theory, flocculation and coagulation involves a three step process that consists of flocculation, flash mixing and coagulation(Akers 1972).... Flocculation on the other hand is a process that leads to the formation of flocs.... The coagulation-flocculation process destabilizes colloids, removes anions and metals, and removes pathogens as well as inorganic matter.... The removal of particulate matter by these methods tends to supplement the effectiveness of the filtering process....
5 Pages (1250 words) Research Paper

Top Growers in Australia

This research paper will examine the different areas of Australia as well as the growing trends in each space.... The different concepts that are associated with this are providing new opportunities within Australia while allowing for the main growth of agriculture to continue within each region....
15 Pages (3750 words) Research Paper

Chemical and Biological Warfare

nbsp; The year 1972 saw the introduction of a new treaty called as the Biological and Toxic Weapons convention which prohibited countries from producing a biological weapon and allowed experiments related to biology only for peaceful work.... The following paper “chemical and Biological Warfare” traces the root of chemical and biological wars, providing insight into how chemical warfare came into the picture and followed with recommendations on how to handle these important issues in future....
8 Pages (2000 words) Research Paper

Analysis and Application of Voltammetry

This report "Analysis and Application of Voltammetry" focuses on pharmaceutical and environmental applications of electroanalytical techniques that have become of interest in the improvements in electrodes of high selectivity and sensitivity in the analysis of organic and inorganic substances....
9 Pages (2250 words) Report

Using Biopesticides as a Promising Alternative to Chemical Pesticides

The quest for increased agricultural production was met by a Green Revolution Era that was concentrated on the use of chemical fertilizers, pesticides, fungicides, and other chemical control means to minimize losses and maximize the effective plant utility of inputs.... Biological tools, which are living organisms, are a conclusive and confident solution to the effects of the Green Revolution since they provide the use of living organisms to solve problems of fertilization and pests' control....
23 Pages (5750 words) Thesis

Occupational Health and Safety

One of the most crucial responsibilities is risk minimization through hazard control.... Some of the activities that take place in hospital care setting include diagnostic services, processing services, operating theatres, record activity, physical laboratories, ambulatories, typography, clerical work, chemical laboratories, biological laboratories, carpentry, mortuary and autopsy rooms, machine shop, pharmacy, clinical wards, sewage and waste management, and electrotechnical shop among others (Jeanne, 1998)....
11 Pages (2750 words) Term Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us