StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

Wind Turbine Design and Construction - Lab Report Example

Cite this document
Summary
The wind turbine is can engineering device that is used to extract wind energy transforming it into mechanical energy (rotation) or other forms of energy such as electrical energy (Burton, Sharpe, Jenkins & Bossanyi,2001). …
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER96.3% of users find it useful
Wind Turbine Design and Construction
Read Text Preview

Extract of sample "Wind Turbine Design and Construction"

?Wind Turbine Design and Construction Introduction The wind turbine is can engineering device that is used to extract wind energy transforming it into mechanical energy (rotation) or other forms of energy such as electrical energy (Burton, Sharpe, Jenkins & Bossanyi,2001). In its very basic nature, the wind turbine consists of the rotating blades, a component that points the turbine to the wind, a system to convert the mechanical rotation of the blades into other forms of energy, the control system, as well as the start and stop mechanisms. There are two main wind turbine designs, the horizontal axis and the vertical axis designs (Spera, 2009). Specifications of the Wind Device For this project, the horizontal axis wind turbine (HAWT) is considered. The horizontal axis machine is preferred due to the fact that less cost is incurred in the foundation (as a fraction of the total cost) of the structure compared to its vertical axis counterpart (Veritas, 2001). This essentially makes HAWT cheaper in cost. The design is also preferred since it does not need to be pointed at the wind direction especially where the wind direction varies almost constantly. The wind turbine is expected to operate at room temperatures (between -200C to 400C). Operating beyond these temperatures may cause the wind turbine generator to work inefficiently or cause structural damage. Furthermore, at extremely low temperatures, the generator may need external power to internal heating. The wind turbine should be ale to work efficiently at different wind speeds and directions. Very high wind speeds (beyond the survival speed) often lead to wind turbine damages according to Veritas (2001). In order to reduce the speed of rotation, a mechanical (disc) braking system will be used. The design will take into consideration the three modes of operation of the turbine; beyond rated speed, around rated speed and below rated speed operations. In order to ensure that the wind turbine operates efficiently at different wind directions, a wind vane will be fitted at the rear of the devices. The vane which also forms the tail of the wind turbine is made of a thin steel plate welded to a slender metal strip. Steel is suitable for its strength and low cost. According to past studies, the mass of a wind turbine for the survivable wind speed is best proportional to the blade length cubed (Stiesdal, 1998). The square of the blade length is also proportional to the power of the wind that is intercepted by the turbine (Stiesdal, 1998). The Rotor Unit As a matter of fact, the most visible and most vital part of the wind turbine is the bladed rotor. The rotor is the part that transforms wind energy into mechanical energy. This energy in turn causes the rotation of the turbine’s main shaft. The turbine blade is designed in such a way as to allow the streamlined flow of wind, the material at best remaining inflexible. Considering this need, the blades will be made of steel sheets. The thickness, twist and width of the blade is a compromise between the need for strength and for the streamline flow of wind (Stiesdal, 1998). Considering that the more the number of blades the greater the aerodynamic efficiency but with reducing return, the turbine to be constructed will have three blades. The transmission system The transmission system of the wind turbines acts as the link between the rotor system and the generator. The transmission system of the wind turbine is basically presented in the following figure. Fig. Transmission system The hub is made of cast iron. The complicated shape of the hub makes casting the most appropriate method for its production according to Stiesdal (1998). The material for the hub is cast iron, the material’s desirable property being its high resistance to fatigue. For such a small turbine, normal cast iron, although the material is fragile and may fracture if exposed to extreme blasts. Fig: The Wind turbine hub The main shaft of the wind turbine is commonly made of hardened steel that is tempered. For this project, hardened steel will be used. The main shaft will be machined on a lathe machine mainly through turning after facing a steel metal rod. Spherical bearings are used as the main bearing to ensure that friction and wear are reduced and therefore high efficiency is achieved in rotation as noted by Zbigniew (2003). The generator is positioned at the top of the tower near the turbine rotor hub. To couple the main shaft to the gear box, a clamping unit is used. A hollow shaft from the gear connects to the main shaft of the wind turbine through a shrink fit created by the clamping unit. The gear box is positioned between the generator and the main shaft with an aim of increasing the slow rotation of the rotor unit to the generator unit’s high speed. The gear box has a speed increase ratio, a factor that determines by how much the speed of the generator is relative to that of the rotor or drive shaft. The coupling that is used to connect the gearbox and the generator is made of steel and rubber. The permanent junction formed by the coupling between the two units if slightly flexible to accommodate differences in alignment between the two units. Fig: Coupling A generator transforms kinetic energy to electrical energy. Generators care of two main types depending on the kind of electricity that they produce; direct current (dc) and alternating current (ac) generators. For, this project, a dc generator is used. In order to control the output of the generator, the control unit will consist of a thyristor inverter and diode rectifier connected to the synchronous generator. References Burton T., Sharpe D., Jenkins N. & Bossanyi E. (2001). Wind Energy Handbook. John Wiley & Sons. Spera D. (2009). Wind Turbine Technology: Fundamental Concepts in Wind Turbine Engineering. ASME Press. Stiesdal H. (1998). The Wind Turbine: Components and Operation. Bonus Energy. Veritas D. (2001). Guidelines for Design of Wind Turbines. Copenhagen: Det Norske Veritas. Zbigniew Lubosny (2003). Wind Turbine Operation in Electric Power Systems: Advanced Modeling (Power Systems). Berlin: Springer. Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Wind Turbine Design and Construction Lab Report”, n.d.)
Retrieved from https://studentshare.org/engineering-and-construction/1430944-wind-driven-device
(Wind Turbine Design and Construction Lab Report)
https://studentshare.org/engineering-and-construction/1430944-wind-driven-device.
“Wind Turbine Design and Construction Lab Report”, n.d. https://studentshare.org/engineering-and-construction/1430944-wind-driven-device.
  • Cited: 0 times

CHECK THESE SAMPLES OF Wind Turbine Design and Construction

Aftermaths of Energy Overconsumption

Offshore wind firms are more complex, inclusive of turbines, platforms, grids, cables, substations, interconnection and related construction activities.... Currently, construction activities have centered in many rejoins of the U.... I support the construction of these offshore winds with long-term charters of numerous highly specialized construction vessels and facilities to put up with the increasing dimensions of contemporary support structures, wind turbines, and balance of plant....
6 Pages (1500 words) Essay

Wind energy: Wind turbines in United States

A wind turbine consists of a dynamo that is mounted on wind-propelled turbines.... Other than the location of a wind farm, the construction of wind turbines determines the rate of energy production.... Such design ensures that the windmill is exposed to us much wind as possible.... From the energy equation E = ½ mv2, it is evident that production of energy is dependent on the speed of the turbine.... Thus, the speed of the turbine determines the rate of energy production....
4 Pages (1000 words) Essay

TeUku Wind Farm Project Analysis

The main motive of its construction is to increase the production of electricity in New Zealand to cub the increasing demand.... The project has earned several awards since it begun its construction based on location, production and mostly environmental conservation.... Its construction will also lead to building of a road network that will help in transportation of the farmers' inputs and outputs.... The plans range from the time used to implement the program to the way of construction of the turbines to the final preparations before electricity is produced....
10 Pages (2500 words) Assignment

Blade for a 10kW Horizontal Axis Wind Turbine

The wind turbine is a rotating device, which converts this wind energy called kinetic energy into mechanical energy.... However, the ultimate aim is to convert the mechanical energy into the electric power and the equipment needed for doing so is called the wind generator or a wind turbine.... It is necessary to point the turbine into the wind so that it can face a wind power.... Small turbine use wind wanes to find the wind direction....
10 Pages (2500 words) Term Paper

How to use a Gold in Wind Turbines

This design further developed into a wind turbine, a device that covers kinetic energy derived from the wind into mechanical energy, which looks much like the opposite of a fan.... A wind turbine uses wind to make electricity unlike a fan, which uses electricity to make wind.... he main parts of a basic wind turbine are the rotor, a drive train, which includes a generator and a gearbox, the tail, the tower.... In addition, a wind turbine will include electrical cables, ground support equipment, interconnection equipment, and controls....
6 Pages (1500 words) Coursework

Types of Alternative Energy

ind energy research and its possible use date back decades to the 1970s when NASA developed an analytical model that predicts wind turbine power generation during periods of high winds (Dismukes, Miller and Bers 182).... The paper "Types of Alternative Energy" discusses that wind energy is a sustainable and alternative source of energy with no adverse effects on the environment.... wind turbines take up less space as compared to traditional fossil fuels, and they are a source of great energy for remote regions....
6 Pages (1500 words) Essay

The Main Bearing of a 2MW Direct-Driven Horizontal Axis Wind Turbine

"The Main Bearing of a 2MW Direct-Driven Horizontal Axis wind turbine" paper focuses on the main bearing that located between the rotor and the generators of wind turbines are the central part of wind turbines which provide a central link for the whole body of the wind turbines.... hellip; The study will help all the interested parties to formulate necessary guidelines for future products especially in the field of renewable energy as wind energy to meet the emerging needs of future generations in the field and designing and manufacturing of the bearings will be handled with ease and effectiveness....
14 Pages (3500 words) Term Paper

Building Design Factors That Ensure Sustainability of Building

For example, the developers will opt to use the locally available construction material so as not to exceed the project budget.... According to DinçEr & Zamfirescu (2011), the climate of the construction site plays a major role in choosing the materials, colors, design of the construction, and in the identification of areas of emphasis.... This paper "Building design Factors That Ensure Sustainability of Building" studies the integration of low energy buildings and sustainable energy systems....
25 Pages (6250 words) Term Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us