StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...
Free

The Global Optimization for Mining Development - Research Paper Example

Cite this document
Summary
The paper "The Global Optimization for Mining Development" states that the mining industry has the full task of producing an original product whose value is unquestionable on international exchanges, and which fluctuates extensively depending on the worldwide demand…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER92.1% of users find it useful

Extract of sample "The Global Optimization for Mining Development"

  • Introduction

The economic viabilities of contemporary day mining are significantly reliance on careful planning and the management of the mines. The declining trend in the average grade and quality of minerals, the increasing cost of mining, and the environmental consideration will often ensure that the situation will be the same and foreseeable future. The operation and the management of the more massive and opens pit having a life of over 5 to close to 50 years is often bi and a complex role (Casagrande et al., 2019, p 28). The planning and the optimization techniques can often be sufficiently applied in solving some critical difficulties that often arise in the development and the administration of mines. Such requests do include ore body modeling and reserves orientation. The most common techniques applied in optimizing the open mines included the geological and resource modeling, open pit economics, optimizations, enterprise optimization, and mineral resource management. Each of the above technique works best in a particular situation, and the application, as well as the benefits associated with each, is quite different. These reports examine each method used to optimize open surface mining (Liu et al., 2017, p82).

  • Mineral exploration of new resources

The rock type pf type of the models interpreted by the geologist is often the basis of the mineral resources evaluation, mine planning and the subsequent stages of the mining process. This kind of motivation, the design of a method for the process pf validating’s the interpreted category that is often assigned to each block and for the findings of the blocks for which the interpretation is often not correct. In bringing this to an end, the geospatially based method has been in the past proposed for the construction of a set kind of stimulated geological scenarios and the purposes of identification of the potentially misinterpreted blocks, assuming that there exists a clear association between the geological categories and the measured quantitative covariates. Such proposals can often be applied in the geological modeling situation and broader contexts of the geometallurgical modeling. In this model, there exist large volumes of multivariate information of different kinds and qualities.

The new focus of the mining industry is fast shifting towards the potential new resources in remote areas due to the decreasing grade of the ores. Remote sensing kind of technology is an effective and widely applied analytical method of geology's and the mineral exploration and in the modern das proved extremely beneficial through providing aces to dangerous and inaccessible minerals deposits. The application of effective planning and optimization methods for the mine site relies on the type of mining and the ore that is being mined. Various mines, especially the open mine sites, have developed vital techniques whose aim is not only to improve the quality of the ore but also to increase the efficiency and reduce the risk associated with open surface mining.

  • Open surface mining Optimization techniques

Geological and resource modeling

A geological model is often made up of the three-dimensional representation of an ore deposit conducted by the resource etiologies based on their knowledge concerning mineral deposits, geological observation in the field, and the essays. A geological model tarts represent a spatial location. The degree of the rock types or the type of the ores is a critical input for any mineral resource optimization and the aspect of mine planning. It affects all the subsequent stages of the mining process. Workflow for assessing mineral resources often is made up of various groups and grouping of rocks. Or the ores in a particle geological domain in which the qualitative kind of variables of interest are often assumed to be equally distributed and then interpolating the variables within every geostaticals technique. The hierarchical workflows account for the geological controls on the distributions of the quantitative variables but often work by producing precise cuts discontinues in the actuals values of the quantitative variables when crossbones the boundaries of each domain. The other approach that is commonly used in creating the graduation and the transitions neat the boundaries of the domains is to model the quantitative variables of interest with no specific past geological demeaning by considering the element of control of the type of rocks and/type of ores as correlated covariates.

The geospatial simulation key of approaches has been designed to construct various geological situations relating to mines to quantify particular locations and the degree of type of rocks, accounting for their spatial kind of continuities and proportions. The different approaches are often in their infancy or theoretical ore body modeling. The critical geological models usually correspond to a particular or a single kind of interpolation of the deposit rather than the multiple situations, which does not make it possible for the geological uncertainty to be measured. This often works to motivate the actual need for quantitative procedures to invalidate the models and identify the areas of the critical deposits that have a considerably higher probability of being misinterpreted.

In the planning of any open surface Mining operation, the principal aim is often to maximize tis task. A series of assumptions usually made, which is the individual case, is far from reality. These may include estimation of the sale prices and the contraction of the mineral ores side the deposit. It is possible to add and measure the risk minimization of the benefits associated with the mining activity. The optimization of the open mine surface using resource modeling includes the use of mathematical methods to optimize the cost of operating the efficiency of the production cost (Casagrande et al., 2019, p 28). Though, the strategic optimization that is often the case adopted by the resource modeling offers rise to troublesome takes that mapping between each secure and separate variables. This produces a mode that is used on the operation of the on-surface mines in various places across the world. The method often can manipulate the fitness function artificially and is applied; for instance, difficulties and is fallouts are often associated with over-all separate resource modeling.

Resource estimation

The use of geological and resource model is often very critical in the estimation of resource. Our company has been able to manage the element of the mine planning through undertaking the entire modelling roles from the filed data that has been obtained through reporting of the CP kind of sign off that is in the process of modelling. The company uses advance software and skills to the resource model in assessing the target deposits on the basis of the anticipated mining activities. The detailed kind of the procedures represents the opportunity to identify the impacts of mining technique assumption about the most optimize process to maximize the recovery and the assists of the client. The preparations of the model of geology is key in the development of a quality and quantity and decipher of the geometrical deposit in terms of the reserve and the resource. In order to effectively plan and optimize the mine resources, the company uses a well state of art process for the 3D modelling of resource.

  • Initial solution

In the generation of an initials population of a chance possible resolutions, a sequential kind of heuristic technique is often applied. The process soft beings with a slant of hunks that are available to mine in the currents age as their respective precursors' blocks that are either previously dug or due to the site in the hunk models they do not have. A hunk is often considered a designated at chance from the list and is signed to the present time and the list efficient again. This procedure often proceeds of the age till the excavating and the dispensation volumes are content, for it is the intelligence of the average beforehand touching on to the following era. Open surface mining and processing volume restraints are often held as hard and soft kind of constraints respective at the procedure. In further diversifying the solution generated, each retro's annual minge capacity for each answer is often selected at chance from the break that is amid the regular and all-out volume that is allowable (Kochetkova et al., 2017).

  • Solution encoding

An answer indoctrination schemes are often used to smear a progressive form of subdivision swarm optimization algorithms in an open surface mines preparation problematic. The future decoding arrangement woks to determine the genuine black along a given a column to be mined at a given time. The value which represents the depth is often allotted to an adjustable that corresponds to the pillar and the age. The pits variable is then efficient by using the standard PSO (Liu et al, 2017 p82).

.

Open pit economics

This is one of the most viable and active mine optimization procedure. The economic limits of an open mining operation is dictated by the three core elements which are the cutoff grade, the stripping ration and the angle of the slope involved. Despite the fact that these elements are often interrelated, they are functions of a number of interdependent functions of a number of interdependent parameters which are too numerous to list completely.

  • Cutoff grade

Cutoff grade is often defined as a grade which exist above which the average grade will often be such that the products recovered will work to pay for its mining and treatment and yield the minimum acceptable profit. However, in an open pit kind of mining, there exist situations where the cutoff grade of the matters that must be removed either as an ore or the waste is often established by the cost at the break even between sending the same to the pant for processing or the dump site for waste. In all these cases, other factors should often be considered such as processing the plant’s capacity, total tone of the ore recovered, market and the condition of the market price. In general, the criteria for the selection of the cutoff grade is often dispicted by the many factors that includes the market price of the commodity, the proceeding cost, the mining and the life of the mine among other factors

  • Stripping ratio

The stripping ratio is the number of units of a waste material which must often be exposed to the units of the ores in the ore body. Such expression is often a representation of the geometric relationship depending upon the characteristics of the ore body and the independents of the values of the ore that is recovered. During the initial stage of the mining process, the stripping ratio is often high. As mining proceeds the stripping ratios also declines, getting to a minimum level before increasing again with the massive mining dept. at this level, the stripping ratio is often the controlling factor in making the comparison by the open put against the underground mining methods.

  • Slope angle

The maximums slope angles for a pit at a particular depths is often provided by the limited which cannot be exceeded without decreasing the probability of the slope failure over which it is acceptable. On the other hand, the minimum slope is often limited by the economic stripping ratio. The lower angle value is defined by the point at which he maximum acceptable or economic stripping ratio is reached. Beyond this particular point, the operations by the open pit method often stopes to become profitable. The steepest pit wall should at the point be consistent with the attitude of the body of the ore and yield the lowest per ton min without any particular failure in the slope which might be the cause of either life or the company’s equipment.

  • Enterprise optimization

Enterprise optimization aims at solving the production program challenges of mining and processing processes with numerous pits, mining appearances and underground mines, various metal or mineral products, blending or stockpiling opportunities, and alternative processing options. The full arrangement of these features produces a substantial development and logical difficulties and opportunities that usually surpass the abilities of commercially accessible mining optimization software. The concurrent optimization aims to address all the phases in the value chain and the complete resources in the enterprise collection. At the same time, consider all periods of the scheduled operation (Iliashenko et al., 2017, p 56). This is usually a vital extra complication distinguishing mining form other forms of business. An ore body is an exhausting reserve when people decide on what to mine and process in one period, and the available opportunities are constrained for future periods. The enterprise optimization on surface mining makes the use of several techniques that aims at solving specific problems at various stages of the mining value chain. Every technique has its specific abilities and restrictions, and as a result, some of the problems have remained unsettled within the planning and optimization zone

  • Enterprise optimization methodology

In the present financial and environmental climate, it is vital to create healthy projects with better economics. Having a look at a general view on the project's business system is very critical for a project to be healthy (Iliashenko et al., 2017, p 56). Therefore, shareholders and experts are demanding faster and improved returns on their investment dollars, and slip-ups in capital costs and project accomplishment have caused harm to many mining businesses. The mine business system is usually a complex one, so many rules of thumb are applied, and many assessments are often prepared on limited data. Then these assessments flow through the project and become almost a law (Kawalec et al., 2017). Whittle Consulting has created an Enterprise Optimization procedure that has proved to be a decent strategic planning instrument for the mining business. The procedure draws from the manufacturing industry and cost accounting. It is mostly focusing on isolation of the critical cost drivers and constraints in the business system and emphasizing the complications that these costs drivers and limitations have on all of the components of the business. Enterprise Optimization comprises ten items: regularly evaluated, pit, cutoff grade, phases, schedule, stockpiles, logistics, product specification, and capital.

Central to the Enterprise Optimization approach is an action-based costing and the model of constraints. The action-based costing is much concerned with the allocation of variable cost drivers that are accurately variable and can adjust or turn out to be a restraint to the rate at which product can be fashioned. Usually, in every business system, there is a stage or a procedure that confines the production rate (Iliashenko et al, 2017, p 56). This constraint should always be predicted and handled differently from the other non-constraining practices. In the mining businesses case, the constraint is usually the processing plant, and precisely the grinding route, and is the only most significant capital expenditure and also the most challenging to increase. This component also tends to have an extraordinary variable cost as well. Even though power can be the highest cost for a processing plant, it can be modeled in the resource model accurately, using drilling rates or logging hardness based on the experimental assessments. After the determination of the accurately variable costs and the isolation of the limitation in the system, the extra features of the variable costs are distributed to period or stable costs. These period expenses always tend to be much higher than the G&A numbers usually cited. Various costs are experienced by an operation that does not fade if it does not generate something (Kawalec et al., 2017, p78).

Mineral resource management

Mineral resources management is often terms as an integrated approaches to resources planning and management along the value chain. The value chins is often associated arrangements of the interdependent process of business that are aimed at optimizing range value process. The new paradigm in the MRM is particularly tasked towards ensuring that the process of optimization of the entire value chains and that the performance of production is in place to support this. Therefore, a resource manager should move to measure that the set of a give minerals resource is often economically optimized over the total chain value defining a mineral resource management strategy. The successful implementation of the minerals resource management MRM often cases for a simples interaction with the existing functional silo’s assessment businesses opportunities, cost, needs of technology and the risk as well as the impacts on the infrastructure and the social environment of the concerned teams. The proposed managerial methodologies must often be aligned with the goals of the company if engagement of the strategy is something to achieve. simple and key action can act as the dive even it involves the use of temporary duplication, creation of a collaborated solution and identification of the preferred solution which often work to define the actuals process and the technical requirement where there is need for the same as such ensuring that the preferred strategy will meet the needs of the individuals company is often very critical. The process of optimization of the mineral resource can be obtained through different procedure including,

Effective exploration

Executions of a strategy of exploration or plan to optimize the mineral resources and develop a formal strategy to follow as define by an organizations strategic document is critical. The geological and the grade models must often continuously update so that the motivational to the mine planning is often added. This normally stated yearly by consultants in the resource states and the key audits.

The collection and processing of information of geology

Geotechnical, a system must often be divided to do the work of assessment of the risk of the slope failure gains the financial benefits that will add the most value to a company. In most case dewatering is done in line with the LT of the plan of the mine.

Mine design and scheduling

The optimum techniques must often be evaluated in order to allow for the full use of the ore grade and the available mineral resource. Through the consideration often macro as well as the micro economic condition of the day into account, each unit of material in the blocked layout of the mines should be frequently get evaluated

  • Condition bases and activity based cost in should form the basis of the economic modulation of the economic viability of each part of the ore and not applying the average cost as it has been the case in the traditional mines
  • Constantly conducting attest of mineral base need to be done in the company from time to time. This is one of the most valuable tool used in the evaluations of the specific need on the continuous improvement.
  • Risk matrix should often be applied in indicating the risk profile of a specific plan of the mine. Most of the mine plants, short and long term had the different scenarios compared with each other without a feel towards the risk profile of each mine plan.
  • Contribution to the industry

All the optimization techniques have both collective and individuals contribution to the mining industry. The most contribution that all the planning and optimization techniques have is the profitability and the element of time saving. However, some methods do have more economic value than others. The application or the use of the resource often works towards increasing the overall benefit of the mine site by improving the output of the mine pit. The mineral resource management technique improves the overall mine situation and ends up increasing the mine productivity by reducing elements or risk and the impacts associated with poor mine planning. The end result is a more productive site. Geological and resource modelling is often an all-round technique in terms of its contribution. For most mine which uses the method of optimization the overall success is often in terms of the ore body and bore type identification. The organization do benefit by having a system which directly points to the orebody as well as the type of the ore. Such do have the benefit of increased mineral volume compared to other site which make the use of different techniques.

This research aimed at developing an understanding of the optimal width that works to maximize productivity. The various method of optimizations is critical in the recommendation of the open surface mine site. The use of the open pit economic eliminated the considerably associated with the financial element of the mineral. Its major goals is reduction of the losses associated with any mining site. The minerals resource economic technique make the best use of economic in evaluating the mine and its profit. The input is often measured again the output and the adjustment which might be deemed applicable put in place with the aim of ensuring that the goal of the mine site is achieved in terms of money. This technique of optimization and planning is often more managerial and does not pay much attention to the quality of the site. It is however very economical for any company and often promote the aspect a mines financial capacity.

As a result of the limited production monitoring data necessary for the equipment matching, engineers rely on the element of trial and errors that often significantly affects operations cost and the utilization equipment. Often the limited kind of use of the advanced models of mathematics in the sequencing can be attributed to the complex nature of the ocean surface mines (Casagrande et al, 2019, p 28). All the commercial open surface mines planning software that works with optimization of production sequences use the heuristics or to produce the optimal sequences and, in this case, to avoid incorporating the mining risks. Through the use of the deterministic approach developed in research, mine engineer and the management can often develop in-house algorithms specific to mine's operation

Recommendations

Open surface mining optimization can take a suitable method, depending on the expected outcome. In other cases, the various methods or techniques of optimization can be integrated by having them used interchangeably of techniques applied after the other. The application of the Open mine economics fundamental objective is often to optimize production planning and to create a mechanism for the implementation of the mining cutoff for open surface mining. One of the most crucial parameters often used in-pit design is the determination of the optimal cutoff grade. An optimum grade made possible by the algorithm often results in the open mine maximization of the net present value. Given that in the determination of the cutoff grade to maximize, a constant value is often obtained for the entire life of the open tine. When the aim of the optimization process if maximizing the profit of the mine, then the application of this method is often encouraged.

Geological and resource modeling and Mineral resource management can also be integrated with a case the aspect or the goal of optimization is based on the minimization of other elements such as safety for the output. Since the two techniques majorly focus on the organization and planning of the mine site, the aspect of the better outcome as a result of this good organization is often a plus for the mine management. In most cases, the two techniques are often applied by mine management. In contrast, the fundamental motive of the use of the technique is the development of a safer and secure mine site, which is free from injuries from accidents. This often works to promote the best understanding of how the mine site is operated. The techniques are often integrated to develop a clear picture of the operations of mines. The other associated goals, especially with Enterprise Optimization, is the improved outcome resulting from the best organization at the mine site (Iliashenko et al., 2017).

Nearly all the Geological and resource modeling often make the use of the back model of the orebody that is the three-dimensional array of identically sized blocks that often covers the entire orebody and the sufficient that surrounds wastes to allow access all the deepest ore blocks. The original model often assumes fixed all angles governed by the block dimensions (Kawalec et al., 2017). None of the subsequent efforts to incorporate a mutable kind of slopes angle often provides sufficient solution where the variable slopes exist and are controlled structures and the geology. It is often assumed that the orebody and surrounding the waste are often divided into the region or, in other cases, domains sectors within which the rocks characterize are the same and that each region is specified by four principal angel-north, southeast and west face slops angels (Iliashenko et al., 2017).

As the integration of the best method or technique that is in line with the purpose of optimization often makes the optimization process very successful. The development of a plan between the management of an organization and the various mine employees makes it viable for the chosen optimization technique of optimization possible. It was using optimizer sequences of pit development from the most valuables to the least valuable mine supplies per ton mines if often recognized (Iliashenko et al., 2017). This skillful by defining a parameter that works to reduce the resource that is often applied to coal and the waste mining coal as the process costs. Often this leads to the money that is available for profit after covering capital cost better defined, overhead, and the other coast associated define and applied at the economic evaluations of the scheduled production (Kawalec et al., 2017). The type of analysis using the key parameters that work to control the pit definition, given all that all the other inputs, is identified as parameter analyses. These parameters are often used in the mines plan for coal site analysis and are often reserved as percentages of the coal's sales revenues. By reserving a substantial percentage of up to 80%, no available pit will be defined because there will be insufficient resources for coal and water removal. The key recommendation is that it is very critical for the company management to first identify the best technique for the company before adopting it.

Challenges that are still left in mine optimization and planning

Despite the progress the have been made in planning and optimization of mine all over the world, there exist various challenges associated with the same. For most mine all in the various parts of South Africa for example the choice and adoption of the best technique for the planning and optimization of the mine remains the greatest challenge. The major concern being that most of the mine manager have little to no understanding of the technique which are key in the optimization of the site. The management of most of these open surface mine often ends up choosing the wrong or the less viable optimization technique hoping to achieve the best outcome.

Other than the element of choice of the mine optimizer, the technology involved is often very expensive for most small mine while Those mines with the abilities of affording the technology involved in a given optimization process do not have a better understanding of the technology involved. Other process do require specialized experts to be able to implement them within a mining company. For example in the implementation of the open pit economic as a planning and optimization tool, there is the need for a company, (mining company) to have the capacity of getting a qualified economist for the process to be successful. Such processes may either have the problem of implementation of the chosen individual do not have the right knowledge over the techniques or the company. Such one of the greatest challenge that most organization managements are dealing with is choosing the appropriate individual who have the right capacity of conducting the assessment with the mine site.

Specific ore body or type of ore do have a given type of optimization and planning technique. Failure of choice of the right technique or the most appropriate element of mine optimizers are often a challenge in the entire process. Most organizations or mining companies’ have significantly failed in the past in acquiring the best optimization procedure as a result of the element of the wrong choice of the optimizer. For example in a scenario where the best optimization technique is the open pit economics, a company that chooses to use the right procedure for the technique chosen might end up failing in the entire planning process. Such can often result in the entire company failing to have the right befits from the mining activities.

Conclusion

The mining industry has the full task of producing an original product whose value is unquestionable on international exchanges, and which fluctuates extensively depending on the worldwide demand. The efficiency and the steadfastness of a mine's equipment are ever becoming more critical to its achievement. In tackling these issues, the operators have to style most of their suppliers' R&D departments; the best thing is that essential improvements have been accomplished on many fronts. This means that whenever new mines are getting planned and old ones to get advanced, the option is always there to optimize production in a way that would have been absurd until lately. The main objective of these algorithms is to determine the optimum pit limit to maximize the overall mining profit within the designed pit limit subject to the mining constraints. However, the geological and resource modeling is the best known for being the only method that always brings the right optimum pit limit. Although several attempts have been made to incorporate the variables slope angles, none has been able to provide an adequate solution.

Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(The Global Optimization for Mining Development Research Paper Example | Topics and Well Written Essays - 5000 words, n.d.)
The Global Optimization for Mining Development Research Paper Example | Topics and Well Written Essays - 5000 words. https://studentshare.org/environmental-studies/2091653-the-global-optimization-for-mining-development
(The Global Optimization for Mining Development Research Paper Example | Topics and Well Written Essays - 5000 Words)
The Global Optimization for Mining Development Research Paper Example | Topics and Well Written Essays - 5000 Words. https://studentshare.org/environmental-studies/2091653-the-global-optimization-for-mining-development.
“The Global Optimization for Mining Development Research Paper Example | Topics and Well Written Essays - 5000 Words”. https://studentshare.org/environmental-studies/2091653-the-global-optimization-for-mining-development.
  • Cited: 0 times
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us