StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

FAULT DIAGNOSIS OF AC High Voltages UNDERGROUND CABLES AND SOLUTIONS ANALYSIS TECHNIQUES - Research Paper Example

Cite this document
Summary
This study focused on faults experienced in AC high voltage underground cables and examined the various ways through which they can be identified and corrected. Wear and tear was found to be one of the major issues leading to electric faults hence power loss. A lot of…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER91.5% of users find it useful
FAULT DIAGNOSIS OF AC High Voltages UNDERGROUND CABLES AND SOLUTIONS ANALYSIS TECHNIQUES
Read Text Preview

Extract of sample "FAULT DIAGNOSIS OF AC High Voltages UNDERGROUND CABLES AND SOLUTIONS ANALYSIS TECHNIQUES"

Download file to see previous pages

I also looked at the formation of water trees in the plastic insulation and how both mechanical and chemical forces trigger them. Besides, charges can also lead to the formation of water trees. After a thorough analysis of fault detection techniques, I settled on two of them. They first one is the magnetic amorphous magneto‐resistive concentric‐neutral probing. The next method is the radio frequency test‐ point injection. The magnetic technique can detect a fault from an average distance of 90 feet.

Underground cables have been in use for a long time in power distribution networks due to the advantages associated with underground connections. These cables are friendly to the environment, are not interrupted by adverse weather conditions, are less expensive for shorter distances and have got low maintenance costs. The disadvantages of these cables are that they are more expensive than overhead lines, have low power transferring capacity, are likely to get permanently damaged and fault location in underground cables is also difficult.

Faults in underground cables are divided into two general groups that are permanent and incipient faults. Incipient faults develop from aging of insulation material that can be caused by chemical pollution, electrical overstress, severe environmental conditions and mechanical factors. Incipient faults gradually turn into permanent faults. Fault location is important in ensuring that distribution networks remain reliable as the restoration will be quick, so that power outage time is reduced. The cost of repair will also be low if a fault is located and corrected promptly.

This research majorly studies how faults can be diagnosed in AC high voltage underground cables and the possible solution techniques for the faults. Some objectives must be achieved to realize this goal. The first objective is to establish the distinction between underground

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“FAULT DIAGNOSIS OF AC High Voltages UNDERGROUND CABLES AND SOLUTIONS Research Paper”, n.d.)
FAULT DIAGNOSIS OF AC High Voltages UNDERGROUND CABLES AND SOLUTIONS Research Paper. Retrieved from https://studentshare.org/engineering-and-construction/1697292-fault-diagnosis-of-ac-high-voltages-underground-cables-and-solutions-analysis-techniques
(FAULT DIAGNOSIS OF AC High Voltages UNDERGROUND CABLES AND SOLUTIONS Research Paper)
FAULT DIAGNOSIS OF AC High Voltages UNDERGROUND CABLES AND SOLUTIONS Research Paper. https://studentshare.org/engineering-and-construction/1697292-fault-diagnosis-of-ac-high-voltages-underground-cables-and-solutions-analysis-techniques.
“FAULT DIAGNOSIS OF AC High Voltages UNDERGROUND CABLES AND SOLUTIONS Research Paper”, n.d. https://studentshare.org/engineering-and-construction/1697292-fault-diagnosis-of-ac-high-voltages-underground-cables-and-solutions-analysis-techniques.
  • Cited: 0 times

CHECK THESE SAMPLES OF FAULT DIAGNOSIS OF AC High Voltages UNDERGROUND CABLES AND SOLUTIONS ANALYSIS TECHNIQUES

Condition monitoring - fault detection and diagnosis

There has been an increase in the use of artificial intelligence and a number of mathematical techniques, such as principal component analysis (PCA), in order to isolate faults and offer diagnosis for industrial systems.... Need for Artificial Intelligence (AI) Applications in Condition Monitoring AI techniques have been applied to a number of different industrial systems including condition monitoring.... It must be recognised that the application of conventional techniques such as time domain, frequency domain and envelope analysis do not always yield satisfactory fault detection....
4 Pages (1000 words) Dissertation

Voltage

Due to a fault on the mains supply, the peak voltage surges instantaneously to 1000V.... 3) A one bar electric fire has a power rating of 1000W (1 kW).... If the RMS voltage of the mains is 240V, find the RMS value of the current flowing in the fire and the peak values of current and voltage....
3 Pages (750 words) Research Paper

Voltage Stability and Control

High voltage power cables require high quality insulation due to the nature of the high electric strength of the currents they transmit.... To ensure that the insulation system meets the standard for high voltage involved, several attempts have been made since a long time ago....
15 Pages (3750 words) Coursework

Low Voltage Stabilized Power Supply

The voltages in the terminals of the transistors and across the 1Ω resistor (this is the voltage between A & C, Vac) are then measured.... This power can come from through batteries or mains powered power supply.... A key requirement of a stabilized power supply is that its output is maintained at constant voltage and is does not react to load current… Low-voltage output is put into points X & Y from the mains transformer after checking that the link connectors arecorrectly connected to the board in the right manner....
2 Pages (500 words) Essay

Condition monitoring - fault detection and diagnosis

fault diagnosis for Valves of Compressors Based on Support Vector Machine.... Research on fault diagnosis for reciprocating compressor valve using information entropy and SVM method.... Application of support vector machine in reciprocating compressor valve fault diagnosis.... fault diagnosis System for Reciprocating Air Compressor Based on Support Vector Machine.... Application of combined support vector machines in process fault diagnosis....
2 Pages (500 words) Literature review

Communication Cable Manufacturer in Organisation

The wire-drawing process increases conductivity and ductility of the communication cables and wires.... The company offers cost-efficient solutions that meet the communication and electrical needs of the consumers.... The company Top Cable offers value creation solutions by improving productivity and reducing costs of operation through service solutions such as cutting, custom making, and kitting (Top Cable 1).... The author of the following term paper "Communication Cable Manufacturer in Organisation" mentions that wires and cables require high precision during the manufacturing process to ensure quality....
12 Pages (3000 words) Term Paper

Ways and Techniques of Control the Output Voltage by Applying of DC/DC Converters

"The Ways and techniques of Control the Output Voltage by Applying of DC/DC Converters" paper tries to understand the operation of each type for DC/DC Converter, DC chopper circuits, and MOSFET, and examine and investigate the methods of controlling the output voltage of DC-DC converters.... he objective of this project work is to study and analyze the ways and techniques of control the output voltage by applying DC/DC converters and based on this study outcomes design a DC/DC Buck converter circuit that has numerous industrial applications....
12 Pages (3000 words) Coursework

Voltage to Frequency Control vs Vector Control

Various control techniques for induction motors have been effectively implemented, facilitating the motor to be applied in a wide range of applications.... Two commonly used techniques include scalar and vector, with the most popular scalar method being the voltage to frequency.... Various control techniques for induction motors have been effectively implemented, facilitating the motor to be applied in a wide range of applications.... Two commonly used techniques include scalar and vector, with the most popular scalar method being the voltage to frequency, also commonly referred to as volts to hertz control....
6 Pages (1500 words) Essay
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us